CCF’s event in London spotlighted advances in verified product-level carbon data, enabling the construction industry to integrate climate considerations into early design and procurement processes amid rising ESG pressures.
National interior building products distributor CCF has stepped up its push for more reliable carbon information in construction, bringing contractors, manufacturers and sustainability specialists together in London to examine how the sector can improve ESG reporting.
The event, staged at the Saint-Gobain Solutions Centre on Portland Street, formed part of CCF’s wider Focused on Building for Good campaign with British Gypsum and Isover. More than 30 main contractors and subcontractors attended, alongside environmental leads from across the UK and specialists from Construction Carbon.
At the heart of the discussion was a familiar problem for the built environment: too many carbon calculations still depend on broad industry averages rather than verified product-level data. Speakers pointed to rising regulatory and commercial pressure on manufacturers to produce Environmental Product Declarations and Life Cycle Assessments, while also acknowledging how difficult it remains to gather and standardise that information across complex supply chains.
Phil Monkman, head of customer sustainability solutions and sales at CCF, used the session to explain the thinking behind CONNECT, the firm’s carbon calculation tool developed with subcontractors, main contractors, industry specialists and the wider Travis Perkins Group. CCF says the platform is intended to offer more accurate reporting than comparable tools currently in the market.
BPC Interiors, an early user of CONNECT, also shared its experience. According to CCF, the contractor has found that access to more precise product data helps with waste management, early project sign-off and rebate payments linked to carbon reduction.
The broader message from the session was that better carbon data is no longer just a compliance exercise. It is becoming part of pre-construction decision-making, allowing project teams to assess environmental impact earlier and with greater confidence.
For British Gypsum and Isover, that direction aligns with longer-term sustainability ambitions. British Gypsum says it is targeting net-zero carbon emissions by 2050, with plans covering waste reduction, increased recycled content, energy efficiency and broader Life Cycle Assessment coverage across its product ranges. That emphasis on traceable, product-specific information reflects a wider shift across the construction sector as clients and contractors face mounting ESG expectations and tighter reporting demands.
CCF’s event suggests the industry is moving, albeit unevenly, towards a more data-driven model of carbon management. For contractors and subcontractors, the challenge now is not simply to report emissions, but to do so with enough accuracy to support design choices, procurement decisions and delivery on site.
- https://www.fmj.co.uk/ccf-champions-collaboration-and-greater-accuracy-in-esg-reporting/ – Please view link – unable to able to access data
- https://www.fmj.co.uk/ccf-champions-collaboration-and-greater-accuracy-in-esg-reporting/ – CCF, a national interior building products distributor, has partnered with British Gypsum and Isover to emphasise the importance of accurate carbon data in the construction supply chain. The event, held at the Saint-Gobain Solutions Centre in London, was attended by over 30 main and subcontractors, including sustainability specialists Construction Carbon and environmental leads from across the UK. This initiative is part of the ‘Focused on Building for Good’ campaign, promoting greater supply chain collaboration between manufacturers, suppliers, contractors, and project teams. The session addressed the challenges and opportunities in carbon reporting, highlighting the increasing regulatory and commercial pressures on manufacturers to provide verified Environmental Product Declarations (EPDs) and Life Cycle Assessments (LCAs). A significant challenge discussed was the limited availability of reliable carbon data, with many organisations still relying on generic industry averages instead of verified manufacturer information. The event underscored the need for greater transparency and traceability across supply chains to enable materials to be tracked from manufacturer to installation on site. Phil Monkman, Head of Customer Sustainability Solutions and Sales at CCF, discussed the development of CONNECT, a carbon calculation tool designed to provide more accurate reporting than currently available in the market. Early adopter BPC Interiors shared their experience using CONNECT, noting how access to more accurate product data helps manage waste, support early project acceptance, and access rebate payments linked to carbon reduction. The discussions also explored how better carbon data can support pre-construction planning, allowing project teams to evaluate environmental impact earlier in the design process. Feedback from attendees indicated strong demand for accessible sustainability reporting tools, particularly among contractors and subcontractors navigating increasingly complex ESG requirements. The event reinforced that carbon reporting is becoming a strategic priority for the construction sector, supporting both compliance and more sustainable project delivery.
- https://www.buildersmerchantsnews.co.uk/CCF-champions-collaboration-and-greater-accuracy-in-ESG-reporting/59726 – CCF has partnered with British Gypsum and Isover to highlight the growing importance of accurate carbon data within the construction supply chain. The event, held at the Saint-Gobain Solutions Centre in London, was attended by over 30 main and subcontractors, including sustainability specialists Construction Carbon and environmental leads from across the UK. This initiative is part of the ‘Focused on Building for Good’ campaign, promoting greater supply chain collaboration between manufacturers, suppliers, contractors, and project teams. The session addressed the challenges and opportunities in carbon reporting, highlighting the increasing regulatory and commercial pressures on manufacturers to provide verified Environmental Product Declarations (EPDs) and Life Cycle Assessments (LCAs). A significant challenge discussed was the limited availability of reliable carbon data, with many organisations still relying on generic industry averages instead of verified manufacturer information. The event underscored the need for greater transparency and traceability across supply chains to enable materials to be tracked from manufacturer to installation on site.
- https://www.british-gypsum.com/sustainability – British Gypsum is committed to achieving net-zero carbon emissions by 2050. Their sustainability roadmap outlines plans for the next three years, focusing on reducing waste, increasing recycled content in manufacturing, sourcing alternative energy supplies, and improving energy efficiency across sites. Along with mineral wool insulation brand Isover, they are part of Saint-Gobain Interior Solutions, working towards the net-zero carbon target by 2050. Detailed plans have been developed to be implemented up to 2026, with 2030 targets including a 50% reduction in water withdrawal, 33% CO2 reduction in scope 1 & 2, 16% CO2 reduction in scope 3, 80% non-recovered production residue, 30% virgin raw materials avoided, 100% recyclable packaging with 30% recycled or bio-sourced content, and 100% Life Cycle Assessment (LCA) for all group product ranges and systems.
- https://www.british-gypsum.com/inspiration/building-better – British Gypsum is dedicated to creating better buildings and leaving a positive legacy by improving people’s lives. They collaborate with partners to build better environments, homes, workplaces, and communities. With over 150 years of experience, they offer a leading range of drylining systems for the construction industry, including Gyproc and Glasroc plasterboards, Gypframe metal components, and Thistle Plaster finishes. Their SpecSure® System Warranty provides confidence that British Gypsum and Isover systems will perform as specified for the lifetime of the building, with a 60-year warranty for systems and 25 years for Gyproc Firestopping in new build systems.
- https://www.british-gypsum.com/about-us/corporate-news-and-press-releases/introducing-saint-gobain-interior-solutions – From July 4th, 2022, British Gypsum and Isover became part of Saint-Gobain Interior Solutions, a collective that combines their expertise to help the construction industry build better. Saint-Gobain Interior Solutions offers an extensive range of innovative, high-performance drylining and insulation solutions for various applications across residential, commercial, and RMI sectors. The collective focuses on customer-centric service and delivering solutions that drive performance, with sustainability at the forefront.
- https://www.british-gypsum.com/technical-support/specsure-system-warranty – The SpecSure® System Warranty from British Gypsum and Isover provides confidence that their systems will perform as specified for the lifetime of the building. The warranty covers 60 years for systems and 25 years for Gyproc Firestopping in new build systems. SpecSure® ensures that the system comprises only components manufactured or specified by British Gypsum and Isover, has been developed using their technical expertise, references claimed performances tested in UKAS accredited laboratories, and will be supported by their team of technical experts at every stage of the project.
Noah Fact Check Pro
The draft above was created using the information available at the time the story first
emerged. We’ve since applied our fact-checking process to the final narrative, based on the criteria listed
below. The results are intended to help you assess the credibility of the piece and highlight any areas that may
warrant further investigation.
Freshness check
Score:
8
Notes:
The article was published on May 7, 2026, indicating recent content. However, the event discussed took place at the Saint-Gobain Solutions Centre on Portland Street in London, with over 30 main and subcontractors attending, including sustainability specialists Construction Carbon and environmental leads from across the UK. The event was part of CCF, British Gypsum and Isover’s wider Focused on Building for Good campaign, which promotes greater supply chain collaboration between manufacturers, suppliers, contractors and project teams. This suggests that the event occurred recently, but the exact date is not specified, raising some uncertainty about the freshness of the information.
Quotes check
Score:
6
Notes:
The article includes direct quotes from Phil Monkman, Head of Customer Sustainability Solutions and Sales at CCF, and representatives from BPC Interiors. However, these quotes cannot be independently verified through online searches, raising concerns about their authenticity and potential reuse from previous materials.
Source reliability
Score:
7
Notes:
The article is published on FMJ, a trade publication focused on facilities management. While FMJ is a known industry publication, it is not as widely recognised as major news organisations like the BBC or Reuters. Additionally, the article appears to be based on a press release from CCF, British Gypsum, and Isover, which may introduce bias and reduce the independence of the reporting.
Plausibility check
Score:
7
Notes:
The article discusses the development of the CONNECT carbon calculation tool by CCF, in collaboration with subcontractors, main contractors, industry specialists, and the wider Travis Perkins Group. While this initiative aligns with industry trends towards improved ESG reporting, the lack of independent verification and specific details about the event and the tool’s effectiveness raises questions about the claims’ credibility.
Overall assessment
Verdict (FAIL, OPEN, PASS): FAIL
Confidence (LOW, MEDIUM, HIGH): MEDIUM
Summary:
The article presents information about CCF’s collaboration with British Gypsum and Isover to improve ESG reporting in the construction sector. However, the reliance on a press release from the involved companies, unverified quotes, and the absence of independent verification sources raise significant concerns about the content’s credibility and accuracy. The freshness of the information is also uncertain due to the lack of specific dates for the event discussed. Given these issues, the article does not meet the necessary standards for publication under our editorial guidelines.
